Skip to main content
PDA

View Full Version : Gateway Laptop Intel 8280 chipset no sound

racin
January 7th, 2006, 05:37 PM
Hi Guys,
Well the wireless is fixed so now on to the sound issue. I have followed the sound problem wiki and I still don't have any sound. Both playback and recording have been set to alsa. PC speaker is activated and sound is turned all the way up. What should I check next? This is on a gateway laptop with on board sound, pentium 4 with the intel 8280 chipset.
Thanks for any help in advance!
stratotak
January 7th, 2006, 06:23 PM
im assuming that the fact you read wiki sound ..you have correct modules for sound loading..tha you have choosen alsa as sound preferences under prefernce??when you click to test dose it work??if all that seems to check out then i would move on to the mixer part..possibly something is muted or turned down low..like pcm sound..i use gnome-aslasmixer to adjust my sound card settings..have you tried that??
racin
January 7th, 2006, 06:52 PM
Yes preferences are correct. They are both set to alsa. In mixer there is a IEC958 P that will not close. I'm thinking this is where the problem lies but I don't know how to force it closed. Thanks for the help.
racin
January 7th, 2006, 06:56 PM
When I test the alsa preference settings I don't hear any sound.
racin
January 8th, 2006, 09:18 AM
Sweet!! It's fixed! Although the actions to fix it are very bizzarre. I went through the sound problem tutorials and did just about everything in them. Still no sound. Then I read stratotak's reply above and thought I would give it one more look! Thanks for your time stratotak! So in alsamixer prefs I turned on external amp for whatever reason I don't know but I did that anyhow. I then backed out to the mixer control settings and using keyboard m turned off the external amp and when I did the computer made noise! It scared me I was like huh??? What the?? And then I figured it out! Holy Cow I got sound! Yahoo!:razz:
pakux
January 8th, 2006, 11:29 PM
YYYYYYYEEEEEEEEESSSSSSSSSS !!!!!!!! :cool:

wow, it took a lot but finally you show me the way... thanks a lot, i've tried everything but the "external amp" tip was the winner (by the way, did anybody figure out why is this active by default?)

again, thank you all very much.
racin
January 9th, 2006, 09:29 PM
Wow! That is crazy wierd that the same procedure worked for you! I thought the external amp thing was a fluke! Oh well glad I was able to help! Enjoy your new found sound!:eek:

Comments

Post a Comment

Popular posts from this blog

Linux Resources Monitoring

dstat Requirements:python Dstat is a versatile replacement for iostat, vmstat and ifstat http://linux.softpedia.com/get/System/Diagnostics/Dstat-1401.shtml  - download the source file  - tar -xvjf dstate-0.7.2.tar.bz2  - cd dstate-0.7.2  - sudo make install 사용법 dstat -cdngys --top-io-adv --top-bio-adv 창넓이가 크면 dstat -cdngys --top-io --top-bio dstat 기본옵션은 -cdngy 2. pktstat requirements: libpcap-devel, ncurses-devel pktstat man page 사용법:sudo pktstat -i eth0 -T -l 실행결과 interface: eth0    total: 43.9Mb (3s) cur: 12.3M (78%) min: 12.3M max: 15.8M avg: 14.5M bps    bps    %      b desc   1.4k   0%   4.3k arp  591.8   0%   1.2k ip proto 88 55.101.66.3 <-> igrp-routers  91.3k   0%  91.3k tcp a100236:4478 <-> console:ssh  42.6k   0% 216.4k tcp a100390:mailprox <-> console:ssh   1.1k   0%   ...
1 comment
Read more

SQLITE Result Codes

#define SQLITE_OK 0 /* Successful result */ /* beginning-of-error-codes */ #define SQLITE_ERROR 1 /* SQL error or missing database */ #define SQLITE_INTERNAL 2 /* Internal logic error in SQLite */ #define SQLITE_PERM 3 /* Access permission denied */ #define SQLITE_ABORT 4 /* Callback routine requested an abort */ #define SQLITE_BUSY 5 /* The database file is locked */ #define SQLITE_LOCKED 6 /* A table in the database is locked */ #define SQLITE_NOMEM 7 /* A malloc() failed */ #define SQLITE_READONLY 8 /* Attempt to write a readonly database */ #define SQLITE_INTERRUPT 9 /* Operation terminated by sqlite3_interrupt()*/ #define SQLITE_IOERR 10 /* Some kind of disk I/O error occurred */ #define SQLITE_CORRUPT 11 /* The database disk image is malformed */ #define SQLITE_NOTFOUND 12 /* NOT USED. Table or record not found */ #define SQLITE_FULL 13 /* Insertion failed because data...
Post a Comment
Read more

nginx로 다중 포트 설정 및 다중 react app 설정

nginx에 다중 포트 설정하기 react로 여러 webapp를 개발하고, 동일한 서버에 실행시킬 필요가 있다. 이때 간단히 nginx에서 다중포트로 여러 webapp를 동일한 서버에서 실행시킬 수 있다. /etc/nginx/sites-available/에 default 파일이 있다. 보통 port 80로 설정되어 있다. 이 파일을 복사해서 sub로 명명한다.   아래와 같이 포트 8080으로 정하고, react app를 build한 디렉터리를 root <dir>로 지정하고, $> sudo service nginx restart 하면 된다. $>sudo systemctl status nginx.service 로 nginx 상태 확인이 가능하면, $> netstat -ano | grep 8080 으로 8080 포트가 살아있는 또는 외부PC에서  $>telnet ip 8080으로 telnet 접속이 되는지 확인하면 된다. 종종 Nginx 500 Interval Server Error가 발생하는데, 이는 1) root <dir>에서 <dir> 주소가 정확하지 않거나, 2) 파일 권한이 없거나이다. chmod 755 <dir>하면 대부분 해결될 것이다. 그럼 오늘도 유익한 하루 되시길..   
Post a Comment
Read more